Tooltos Lost Wax Method Digital Display Jewelry Vacuum Investing Casting Melting Machine

Accurate Pressure Gauge: Monitoring the current pressure helps you make relevant adjustments as needed to create a smooth surface. The cover shell made of metal features good durability.
Smelt Quickly: The jewelry vacuum investing casting melting machine can be heated and heated quickly. Provides precise temperature control with an easy-to-read digital display and LED on/off indicator. It can be heated up to 1250 ° C and can melt metals with melting points below 1250 ° C in 40 Minutes.
Vacuum Hood: The vacuum hood is made of thick aviation plastic for excellent sealing and vacuum performance, helping to minimize burrs and air bubbles created during the casting process.
Wide Application: Suit for making gold nuggets, ingots, or jewelry, smelting recycling scrap, refining jewelry, and casting all kinds of fast-melting metals, including gold, silver, lead, copper, brass, bronze, aluminum, etc.

TIP:
We would like to remind you that there is no vacuum pump in the unit and you will need to A vacuum pump of approx. 2 liters is required.

Technical Parameters

Voltage: 110V/220V
Power: 2000W
Maximum Temperature: 1250℃
Temperature Error: ±5℃
Working Environment Temperature：0-50℃，30-85%RH
Stainless Steel Plaster Mold: 3*6inch
Graphite Crucible Capacity：1/2/3KG(Optional)
Vacuum Table Size: 175*175 MM
Vacuum Hood Size: 140*210 MM
Casting Room Size: 150*190 MM
Machine Size: 416*365*510 MM
Weight: about 21kg

Package Included

1 x Jewelry Vacuum Investing Casting Melting Machine
1 x 1/2/3KG Graphite Crucible(Optional)
1 x Instruction Manual
1 x Crucible Pliers
1 x Gloves
1 x Rubber Base
1 x 3*6inch Stainless Steel Plaster Mold
1 x Vacuum Hood
1 x Hose+Air filter
1 x Graphite Gasket
1 x Rubber Gasket
1 x Power Cable

How to cast a jewelry model
1. Put it into the vacuum hood. Able to reduce pores & burrs making it flawless
2. Replace the item in the 2L casting chamber. Inject the prepared molten iron
3. Cool down the model in the water and take out the semi-finished jewelry
4. Polish the item carefully, then beautiful jewelry is done.
How to use melting
1. Plug in and turn on the switch
2. Put in the melt
3. Heat for 30 to 50 minutes (up to 1250°C)
4. Remove the melted liquid
Note
1, Do not continuous melting casting, every two furnace interval time 40-50 minutes, the amount of more recommended to prepare several crucible rotation.
2, The melting point can not exceed 1100℃, commonly used precious metals are within this range, casting temperature can be set, according to the actual situation, do not exceed the melting point too much, so as not to increase unnecessary load.
3. Do not melt and cast metals with high impurities, such as sand gold.
4. Pour out immediately after melting